tell us what do you need
RSM Team will source it out for you! !
Modification and certification of an industrial robot according to the IECEx guideline.
This product sold by vendor
IECEx modification
Modification and certification of an industrial robot according to the IECEx guideline.
Suitable for use in an explosive atmosphere consisting of dust or gas / steam.
| Application | Consulting, IECEx modification |
|---|---|
| Type of service | Explosion Protection |
| Other features | Explosion-proof, Safety |
| Country of origin | Germany |
| Country of shipment | Germany |
| Vendor | SP007-0124-AZ |
| About Vendor | The company specialize in planning and development of system solutions in plant engineering, in explosion hazardous areas or with explosion hazardous material. Including the drawing up of explosion protection documents in accordance with the ATEX directive 99/92 EC as well as the hazardous substances ordinance and the hazard analysis 2014/34 EU. The company attend to all projects from the conception to the operational implementation to the targeted achievement. |
| Comments | Specialized in explosion protection the company is the competent and reliable partner. The main industrial fields covered are planning and development of system solutions in plant engineering, in explosion hazardous areas or with explosion hazardous material. |
You must be logged in to post a review.
Consulting
ATEX modification and certification Ex2G (Zone 1).
Modification and certification of an industrial robot for ATEX Zone 1. Suitable for use in an explosive gas / vapor atmosphere.
Possible areas of application: painting, filling flammable liquids, sealing, gluing, etc.
Certification according to ATEX product guideline 2014/34 / EU.
Marking: Ex II 2G IIB T3
Declaration of conformity according to EN ISO 80079, EN 60079
Consulting
ATEX modification and certification Ex3D (Zone 22)
Modification and certification of an industrial robot for ATEX Zone 22. Suitable for use in an explosive atmosphere composed of dust.
Possible areas of application: powder coating, handling in the food sector, etc.
Certification according to ATEX product guideline 2014/34 / EU
Marking: Ex II 3D IIIB T200° C
Declaration of conformity according to EN ISO 80079, EN 60079
Consulting
Explosion protection documentation
Explosion protection documentation prepared by us in accordance with ATEX directives 99/92 EC as well as the Hazardous Substances Ordinance and a risk analysis in accordance with 2014/34 / EU (for manufacturers of devices and systems) provides you with evidence of the determination and assessment of possible explosion hazards and the determination of suitable ones Protective measures.
From recording the process engineering to recognizing hazards, identifying existing ignition sources and classifying them according to explosion zones to preparing all necessary / required documents, we will work out a solution tailored to your company.
Consulting
ATEX modification and certification Ex3G (Zone 2).
Modification and certification of an industrial robot for ATEX Zone 2. Suitable for use in an explosive gas / vapor atmosphere.
Possible areas of application: painting, filling flammable liquids, sealing, gluing, etc.
Certification according to ATEX product guideline 2014/34 / EU
Marking: Ex II 3G IIB T3
Declaration of conformity according to EN ISO 80079, EN 60079
Consulting
ATEX modification and certification Ex2D (Zone 21)
Modification and certification of an industrial robot for ATEX Zone 21. Suitable for use in an explosive atmosphere composed of dust.
Possible areas of application: powder coating, handling in the food sector, etc.
Certification according to ATEX product guideline 2014/34 / EU.
Marking: Ex II 2D IIIB T200° C.
Declaration of conformity according to EN ISO 80079, EN 60079
The consultant has vast experience and can provide consulting in the area of automotive but he is flexible to any other industry.
He provides support and service in these fields:
• Collaboration with developers, engineers, project managers, clients, and other stakeholders to understand the requirements and scope of the robotics project.
• Drafting blueprints, sketches, or other documentation demonstrating proposed ideas and prototypes, modifying based on feedback and simulation results.
• Designing and developing robotic prototypes.
• Construction, configuring, testing, and debugging robots and robotic systems.
• Installing, operating, calibrating, and maintaining robots.
• Ensuring that robotic machines operate safely, dependably, and with identified and implemented modifications.
• Providing technical support and troubleshooting services for robotic systems.
• Recommending, developing, and implementing enhancements and improvements to increase production volume or precision in high-through put operations.
• Maintaining documentation of development process, modifications, maintenance requirements, and other data.
• Assisting with cost estimates and project calculations.
• Maintaining knowledge of existing and developing technology and trends in robotics.
• Performing other related duties as assigned
The company integrates the following:
– Poly-articulated robots
– Collaborative robots
– Specific equipment for industrial applications
– Special machines
– Turnkey delivery and Project management
Customers that trusted them:
Fiat-Chrysler & PSA (Stellantis), Plastic Omnium, ABB, Heineken, Coca-Cola, Ikea, Fanuc, Renault, Saint-Gobain, startups etc…
Consulting
ATEX modification and certification Ex2D (Zone 21)
Modification and certification of an industrial robot for ATEX Zone 21. Suitable for use in an explosive atmosphere composed of dust.
Possible areas of application: powder coating, handling in the food sector, etc.
Certification according to ATEX product guideline 2014/34 / EU.
Marking: Ex II 2D IIIB T200° C.
Declaration of conformity according to EN ISO 80079, EN 60079
Consulting
ATEX modification and certification Ex3G (Zone 2).
Modification and certification of an industrial robot for ATEX Zone 2. Suitable for use in an explosive gas / vapor atmosphere.
Possible areas of application: painting, filling flammable liquids, sealing, gluing, etc.
Certification according to ATEX product guideline 2014/34 / EU
Marking: Ex II 3G IIB T3
Declaration of conformity according to EN ISO 80079, EN 60079
Software
The CAD Grip 2.0 enables interactive configuration of gripper / EOAT systems.
Operating the program is easy and intuitive. Previous knowledge, for example of a CAD system, is not necessary.
CAD Grip is functioning fully independent without usage of any other CAD Software. The user is able, to configure the gripper offline. Software Installation is not necessary. The user receives valuable tips for constructive alternative solutions as he proceeds.
The virtual construction is performed controlled and optimized. The attachment of the matching components takes place automatically. This avoids mistakes in the concept phase already.
When the configuration is completed, the component list can be exported to the Customer Portal and can be ready for instantly placing your order. The project can be saved in the appropriate format for his CAD-Software, as there is Inventor, Autocad, Solidworks, Proengineer or Catia, only to name a few.
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
Why Shop On Our Marketplace?
Our experts will support you
whenever you need us.
We guarantee to find you the
best solution at the best price.
International online and offline
trade and services.
RSM Team will source it out for you! !
for filling out your information!
We will look over your message and get back to you ASAP
Start to maximize the value of your assets with us.
Reviews
There are no reviews yet.