tell us what do you need
RSM Team will source it out for you! !
Grippers made for the following industries:
• Automotive
• Aerospace
• Foundries
• General industries
What make the product unique :
• Robust & powerful
• 3 jaws high precision
• Safety springs
• Enclosed compact design
• Harsh Environment
• Multi-purpose accessories
€800,00
This product sold by vendor
The product was especially made for confined spaces, combining large opening angle with a high torque. Optional safety springs retain the components, in case of air supply fail or to increase grip force. It is ideal for a large range of options such as pneumatic operation, clamping, seals etc…
These grippers were specially manufactured for heavy duty, extreme high temperature applications.
Some key features:
• Grip force (N): 313-3941
• Variant gripper size and features:
• 62 M:
Opening Angle: 16.8°
Grip Force N: 313-384 (70-86)
• 82 M:
Opening Angle: 15.9°
Grip Force N: 922-1228 (207-276)
• 112 M:E67
Opening Angle: 19.1°
Grip Force N: 1600-2150 (360-483)
• 142 M:
Opening Angle: 17.6°
Grip Force N: 3941-5775 (886-1298)
• 162 M:
Opening Angle: 17.2°
Grip Force N: 3790-5490 (853-1234)
| Type of product | EOAT/Gripper |
|---|---|
| Type of Operation | Pneumatic |
| Type of Gripper | Parallel |
| Type of Action | Double Acting |
| Strength (N) | 501-2000 N |
| Type of Robot | 6-axes robot industrial |
| Country of origin | France |
| Country of shipment | France |
| Vendor ID | SP018-0189-DE |
| Number of Jaws | shielded gripper, 3-Jaw |
| Stroke per Finger (mm) | 4-20mm |
| About Vendor | The company is world wide supplier of high-performance automation, workholding and containment solutions. With more than 100 years of experience, it has dedicated all of its strenght, creativity and ressources on supporting manufacturers across all industries improving their accuracy and productivity. The company is mainly represented all over the world. Their far-reaching network enables them to deliver solutions anywhere and support their customer whenever or wherever they are. |
| Comments | ISO 5,6,7,8 Security option: Springs inside |
You must be logged in to post a review.
This tool changer series is able to lift up to 550 Kg.
Possibility to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.
Due to its high level of flexibility, this series allows accommodating up to 4 optional modules to be picked up among a wide range of choice, 6 patented roller mechanisms that provide a low stress and highly rigid locking capability, and accommodations for the two halves to couple and to be safe in case of air failure.
Some key features:
• Speed: Change end effectors in seconds
• Payload: from 90 to 550 kg
• Strength: Ideal to any robot application due to its locking mechanism
• Performance: Time saving due to integrated air ports and electrical connectors that provide immediate power to the system and vanishes manual re-connection of air lines or sensors
• Ports: 19 pin Electrical and 6 Pneumatic Ports
Associations:
• Tool changer-200
Combined Weight: 3 Kg [6.7 lb]
Max. Payload: 90 Kg [200 lb]
Max. Moment: 810 Nm [7200 in-lb]
• Tool changer -400
Combined Weight: 4.7 Kg [10.4 lb]
Max. Payload: 180 Kg [400 lb]
Max. Moment: 1580 Nm [14000 in-lb]
• Tool changer -800
Combined Weight: 7.1 Kg [15.8 lb]
Max. Payload: 360 Kg [800 lb]
Max. Moment: 2490 Nm [22000 in-lb]
• Tool changer-1200
Combined Weight: 8.3 Kg [18.4 lb]
Max. Payload: 550 Kg [1200 lb]
Max. Moment: 3390 Nm [30000 in-lb]
• Tool changer -2400
Combined Weight: 30 Kg [66.1 lb]
Max. Payload: 1089 Kg [2400 lb]
Max. Moment: 7000 Nm [61955 in-lb]
This series of grippers was especially made for machining and harsh environment, for high vibration and impact applications. It was manufactured for pick-and-place applications. Safety option maintains grip in case of air pressure loss.
Some key features:
• Gripper 25:
Stroke mm: 20 (0.787)
Grip Force N: 474 (106)
• Gripper 45:
Stroke mm: 30 (1.181)
Grip Force N: 481 (108)
• Gripper 65:
Stroke mm: 40 (1.575)
Grip Force N: 796 (179)
• Gripper 85:
Stroke mm: 50 (1.968)
Grip Force N: 1480 (333)
No mounting pattern
• Gripper 105:
Stroke mm: 60 (2.362)
Grip Force N: 2318 (521)
No mounting pattern
This manual tool changer series is especially made for cobots applications.
Some data:
• Robot plate compatible with most cobots – Kuka, UR, Fanuc, Doosan, Omron, Stäubli etc…
• No adapter plate needed
• Electrical modules mounting
• Integrated Air ports (four pneumatic pass-through connections for quick tool coupling).
• Lightweight and rigid
• Locks in place when inserted and push-button release
• Can have multiple preconfigured tool
• Change from pneumatic to electric actuation in seconds
• Quickly change between multiple tooling
Some key features:
• Repeatability: to +/-0.025mm
• 330g lightweight coupling solution
• 25mm coupled solution
This gripper is especially manufactured for use in confined spaces.
Due to the wide range of fitting accessories, the gripper can be used in numerous applications.
The full jaw opening (180°) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator.
Some key features:
• 12 M gripper:
Open Angle: 90° per finger
Grip force N: 32-40 (7.2-9)
• 16 M gripper:
Open Angle: 90° per finger
Grip force N: 70-87 (16-19)
• 20 M gripper:
Open Angle: 90° per finger
Grip force N: 112-141 (25-32)
• 25M gripper:
Open Angle: 90° per finger
Grip force N: 157-199 (35-45)
• 32 M gripper:
Open Angle: 90° per finger
Grip force N: 272-353 (61-79)
• 40 M gripper:
Open Angle: 90° per finger
Grip force N: 446-592 (100-133)
• 50 M gripper:
Open Angle: 90° per finger
Grip force N: 651-893 (146-201)
The product was especially made for confined spaces, combining large opening angle with a high torque. Optional safety springs retain the components, in case of air supply fail or to increase grip force. It is ideal for a large range of options such as pneumatic operation, clamping, seals etc…
These grippers were specially manufactured for heavy duty, extreme high temperature applications.
Some key features:
• Grip force (N): 313-3941
• Variant gripper size and features:
• 62 M:
Opening Angle: 16.8°
Grip Force N: 313-384 (70-86)
• 82 M:
Opening Angle: 15.9°
Grip Force N: 922-1228 (207-276)
• 112 M:
Opening Angle: 19.1°
Grip Force N: 1600-2150 (360-483)
• 142 M:
Opening Angle: 17.6°
Grip Force N: 3941-5775 (886-1298)
• 162 M:
Opening Angle: 17.2°
Grip Force N: 3790-5490 (853-1234)
This series of grippers was especially made for high particulate application environments, automotive industry, heavy industry.
The grippers are available in 8 sizes for small lightweight to very large and heavy part gripping. They avoid metal particulates. Particularly reliable due to to its spring assist option that maintains grip in case of air pressure loss.
Some key features:
• Grip force (N): 361-28002
• Variant gripper size and features:
• Gripper-1M :
Stroke mm: 4-8 (0.16-0.32)
Grip Force N: 361-693 – (81-156)
• Gripper-2M:
Stroke mm: 6-12 (0.24-0.47)
Grip Force N: 494 -1006 (111-226)
• Gripper-3M:
Stroke mm: 8-16 (0.31-0.63)
Grip Force N: 854 – 1683 (192-379)
• Gripper-4M:
Stroke mm: 10-20 (0.39 -0.79)
Grip Force N: 1414-2789 (318-628)
• Gripper-5M:
Stroke mm: 13-26 (0.51-1.02)
Grip Force N: 2333-4609 (525-1037)
• Gripper-6M:
Stroke mm: 16-32 (0.63-1.26)
Grip Force N: 4062-8640 (914-1944)
• Gripper-7M:
Stroke mm: 25-50 (0.98-1.97)
Grip Force N: 6404-12542 (1441-2822)
• Gripper-8M:
Stroke mm:35-70 (1.38-2.76)
Grip Force N: 14178-28002 (3190-6300)
Material Handling
The kit was developed out of years of experience in gripper construction. The concept is to assemble the components in perpendicular orientation whenever possible and make only the active element, such as the vacuum cups, the sprue gripper or gripper finger freely adjustable. All channel nut components are compatible.
Combination of x-ray and UT imaging
Unlike conventional devices, the integration of imaging technologies on six-axis robotic arms gives a high degree of flexibility in monitoring the complex curvature on both sides of the inspected object, allowing non-destructive testing (NDT) to be expanded and improved. Robots allow to scan a sample with the use of X-ray from a different perspective to locate defects more easily, quickly, and better.
One of the major advantages is that the system can be moved to the object to be inspected. This is in sharp contrast to common industrial CT systems where the sample has to fit inside. Our machine can get to the sample.
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
Why Shop On Our Marketplace?
Our experts will support you
whenever you need us.
We guarantee to find you the
best solution at the best price.
International online and offline
trade and services.
RSM Team will source it out for you! !
for filling out your information!
We will look over your message and get back to you ASAP
Start to maximize the value of your assets with us.
Reviews
There are no reviews yet.