tell us what do you need
RSM Team will source it out for you! !
What makes the product so unique:
• Heavy-Duty Tool Changer
• Able to lift high payload up to 550 kg
• Quick disconnect
• Reduce downtime
• Ideal for any robotic applications
• Multi-purpose accessories
• Modular design configurable
Suits to the following industries:
• Automotive
• Aerospace
• Foundries
• All industries
€2.000,00
This product sold by vendor
This tool changer series is able to lift up to 550 Kg.
Possibility to quick disconnect, I/O, air, water, weld power, servo power, vacuum lines.
Due to its high level of flexibility, this series allows accommodating up to 4 optional modules to be picked up among a wide range of choice, 6 patented roller mechanisms that provide a low stress and highly rigid locking capability, and accommodations for the two halves to couple and to be safe in case of air failure.
Some key features:
• Speed: Change end effectors in seconds
• Payload: from 90 to 550 kg
• Strength: Ideal to any robot application due to its locking mechanism
• Performance: Time saving due to integrated air ports and electrical connectors that provide immediate power to the system and vanishes manual re-connection of air lines or sensors
• Ports: 19 pin Electrical and 6 Pneumatic Ports
Associations:
• Tool changer-200
Combined Weight: 3 Kg [6.7 lb]
Max. Payload: 90 Kg [200 lb]
Max. Moment: 810 Nm [7200 in-lb]
• Tool changer -400
Combined Weight: 4.7 Kg [10.4 lb]
Max. Payload: 180 Kg [400 lb]
Max. Moment: 1580 Nm [14000 in-lb]
• Tool changer -800
Combined Weight: 7.1 Kg [15.8 lb]
Max. Payload: 360 Kg [800 lb]
Max. Moment: 2490 Nm [22000 in-lb]
• Tool changer-1200
Combined Weight: 8.3 Kg [18.4 lb]
Max. Payload: 550 Kg [1200 lb]
Max. Moment: 3390 Nm [30000 in-lb]
• Tool changer -2400
Combined Weight: 30 Kg [66.1 lb]
Max. Payload: 1089 Kg [2400 lb]
Max. Moment: 7000 Nm [61955 in-lb]
| Type of product | Robotic tool changer |
|---|---|
| Type of Operation | Automatic |
| Handle weight (kg) | >100kg |
| Energy Connection | Both |
| Country of origin | France |
| Country of shipment | France |
| Vendor ID | SP018-0189-DE |
| Type of Robot | 6-axes robot industrial |
| About Vendor | The company is world wide supplier of high-performance automation, workholding and containment solutions. With more than 100 years of experience, it has dedicated all of its strenght, creativity and ressources on supporting manufacturers across all industries improving their accuracy and productivity. The company is mainly represented all over the world. Their far-reaching network enables them to deliver solutions anywhere and support their customer whenever or wherever they are. |
| Comments | ISO9409-1 Mounting pattern |
You must be logged in to post a review.
The product was especially made for confined spaces, combining large opening angle with a high torque. Optional safety springs retain the components, in case of air supply fail or to increase grip force. It is ideal for a large range of options such as pneumatic operation, clamping, seals etc…
These grippers were specially manufactured for heavy duty, extreme high temperature applications.
Some key features:
• Grip force (N): 313-3941
• Variant gripper size and features:
• 62 M:
Opening Angle: 16.8°
Grip Force N: 313-384 (70-86)
• 82 M:
Opening Angle: 15.9°
Grip Force N: 922-1228 (207-276)
• 112 M:E67
Opening Angle: 19.1°
Grip Force N: 1600-2150 (360-483)
• 142 M:
Opening Angle: 17.6°
Grip Force N: 3941-5775 (886-1298)
• 162 M:
Opening Angle: 17.2°
Grip Force N: 3790-5490 (853-1234)
This manual tool changer series is especially made for cobots applications.
Some data:
• Robot plate compatible with most cobots – Kuka, UR, Fanuc, Doosan, Omron, Stäubli etc…
• No adapter plate needed
• Electrical modules mounting
• Integrated Air ports (four pneumatic pass-through connections for quick tool coupling).
• Lightweight and rigid
• Locks in place when inserted and push-button release
• Can have multiple preconfigured tool
• Change from pneumatic to electric actuation in seconds
• Quickly change between multiple tooling
Some key features:
• Repeatability: to +/-0.025mm
• 330g lightweight coupling solution
• 25mm coupled solution
This series of grippers was especially made for high particulate application environments, automotive industry, heavy industry.
The grippers are available in 8 sizes for small lightweight to very large and heavy part gripping. They avoid metal particulates. Particularly reliable due to to its spring assist option that maintains grip in case of air pressure loss.
Some key features:
• Grip force (N): 361-28002
• Variant gripper size and features:
• Gripper-1M :
Stroke mm: 4-8 (0.16-0.32)
Grip Force N: 361-693 – (81-156)
• Gripper-2M:
Stroke mm: 6-12 (0.24-0.47)
Grip Force N: 494 -1006 (111-226)
• Gripper-3M:
Stroke mm: 8-16 (0.31-0.63)
Grip Force N: 854 – 1683 (192-379)
• Gripper-4M:
Stroke mm: 10-20 (0.39 -0.79)
Grip Force N: 1414-2789 (318-628)
• Gripper-5M:
Stroke mm: 13-26 (0.51-1.02)
Grip Force N: 2333-4609 (525-1037)
• Gripper-6M:
Stroke mm: 16-32 (0.63-1.26)
Grip Force N: 4062-8640 (914-1944)
• Gripper-7M:
Stroke mm: 25-50 (0.98-1.97)
Grip Force N: 6404-12542 (1441-2822)
• Gripper-8M:
Stroke mm:35-70 (1.38-2.76)
Grip Force N: 14178-28002 (3190-6300)
This gripper is especially manufactured for use in confined spaces.
Due to the wide range of fitting accessories, the gripper can be used in numerous applications.
The full jaw opening (180°) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator.
Some key features:
• 12 M gripper:
Open Angle: 90° per finger
Grip force N: 32-40 (7.2-9)
• 16 M gripper:
Open Angle: 90° per finger
Grip force N: 70-87 (16-19)
• 20 M gripper:
Open Angle: 90° per finger
Grip force N: 112-141 (25-32)
• 25M gripper:
Open Angle: 90° per finger
Grip force N: 157-199 (35-45)
• 32 M gripper:
Open Angle: 90° per finger
Grip force N: 272-353 (61-79)
• 40 M gripper:
Open Angle: 90° per finger
Grip force N: 446-592 (100-133)
• 50 M gripper:
Open Angle: 90° per finger
Grip force N: 651-893 (146-201)
This series of grippers was especially made for machining and harsh environment, for high vibration and impact applications. It was manufactured for pick-and-place applications. Safety option maintains grip in case of air pressure loss.
Some key features:
• Gripper 25:
Stroke mm: 20 (0.787)
Grip Force N: 474 (106)
• Gripper 45:
Stroke mm: 30 (1.181)
Grip Force N: 481 (108)
• Gripper 65:
Stroke mm: 40 (1.575)
Grip Force N: 796 (179)
• Gripper 85:
Stroke mm: 50 (1.968)
Grip Force N: 1480 (333)
No mounting pattern
• Gripper 105:
Stroke mm: 60 (2.362)
Grip Force N: 2318 (521)
No mounting pattern
The product was especially made for confined spaces, combining large opening angle with a high torque. Optional safety springs retain the components, in case of air supply fail or to increase grip force. It is ideal for a large range of options such as pneumatic operation, clamping, seals etc…
These grippers were specially manufactured for heavy duty, extreme high temperature applications.
Some key features:
• Grip force (N): 313-3941
• Variant gripper size and features:
• 62 M:
Opening Angle: 16.8°
Grip Force N: 313-384 (70-86)
• 82 M:
Opening Angle: 15.9°
Grip Force N: 922-1228 (207-276)
• 112 M:
Opening Angle: 19.1°
Grip Force N: 1600-2150 (360-483)
• 142 M:
Opening Angle: 17.6°
Grip Force N: 3941-5775 (886-1298)
• 162 M:
Opening Angle: 17.2°
Grip Force N: 3790-5490 (853-1234)
Material Handling
The kit was developed out of years of experience in gripper construction. The concept is to assemble the components in perpendicular orientation whenever possible and make only the active element, such as the vacuum cups, the sprue gripper or gripper finger freely adjustable. All channel nut components are compatible.
3D Vision System positioning robot in space
This 3D Vision System is an eye for the robot. The advanced optical system, positioning and scanning algorithms allow for the offset of production processes and visual inspection of items. The robot arm with vision system scans the workspace and finds the items that are needed according to the models, and can also perform other activities on it – packing, pick & place, soldering, assembly.
Robot Components
The company is ready to build the complete gripper, either using the components out of our two systems (PreciGrip or channel nut) or by doing the construction additive, with laser welding technology. Two kinds of documentation are available. A simplified version or the DIN documentation, containing electric / pneumatic diagrams and the declaration of conformity.
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
Why Shop On Our Marketplace?
Our experts will support you
whenever you need us.
We guarantee to find you the
best solution at the best price.
International online and offline
trade and services.
RSM Team will source it out for you! !
for filling out your information!
We will look over your message and get back to you ASAP
Start to maximize the value of your assets with us.
Reviews
There are no reviews yet.