We Will Create A Virtual Design Of Your Production Line
Close Force: 250 N
Open Force: 280 N
Air pressure set: at 0.6 MPa.
Measurement Distance L: 10 mm
Jaw Stroke: 12mm(dia.), 6mm(per finger)
Repeatability: ±0.01 mm
Mass: 0.29 kg
Air Consumption per reciprocating : 8.4 cm3
Air pressure: 0.2 ~ 0.8 MPa
Operating Temperature: 5 ~ 60 ℃
Close Force: 2700 N
Open Force: 2870 N
Air pressure set at: 0.6 MPa.
Measurement Distance L: 20 mm
Jaw Stroke: 40mm(dia.), 20mm(per finger)
Repeatability: ±0.01 mm
Mass: 5.14 kg
Air Consumption per reciprocating :
272.2 cm3
Air pressure : 0.2 ~ 0.8 MPa
Operating Temperature: 5 ~ 60 ℃
Painting
The product is a system composed of a dedicated software and a pair of photoelectric barriers. It is used on a line, and can identify 2D surfaces.
It creates the painting path independently and associates it with a recipe that can be set by an operator. The recipe is based on a series of spraying parameter.
During an initial work phase, recipes are created for each piece, once that’s completed, the only thing left to do is to load the conveyor with the pieces needing to be painted.
The 2D system recognizes the parts, associating them with the corresponding recipe and creates the best painting path.
Painting
Some key features:
• Arm material: Aluminum
• Total weight: 72 Kg
• Repeatability: ±1,5 mm at the wrist
• Full speed: 600 mm/s
• Possible configurations: Upside down, floor, carriage, carousel
• Power supply: 3×400 VAC
• Programming: Offline, Point to point lite
Some key features:
• Payload force fit:
• Normal grip: 10 kg
• Flexible grip: 8 kg
• Payload form fit: 15 kg
• Grip diameter external: 4 mm(min) – 152 mm (max)
• Grip diameter internal: 35 mm (min)- 176 mm (max)
Gripping force:
• normal grip: 240 [N]
• Flexible grip: 140 [N]
• Gripping force: 100%
• Gripping speed: 125 mm/s
• Gripping time: 500 ms
• Dimensions: 156x158x180 mm
• Weight: 1.15 kg
• TCP: X=0; Y=0; Z=105
• Center of gravity: cX=0;cY=0;cZ=83 mm
• Fingers can be adjusted in 3 different positions
• Possibility to create custom fingers
• Accurate centric positioning drives higher quality, consistency, and output with minimal programming
• Strong, stable grip and 3 contact points makes gripper fast and easy to redeploy for multiple processes
• Accomplish more with customizable fingertips to flexibly grip a wide range of part sizes and shapes
What does the package offer:
• 1 piece of gripper base unit
• 3 pieces standard fingers
• 3 pieces 10 mm. steel fingertips
• 3 pieces 13.5 mm. ruber fingertips
• Torx key
Additional fingertips:
3 pieces Ø 13 mm. steel fingertips
3 pieces Ø 16.5 mm. rubber fingertips
The product was especially made for confined spaces, combining large opening angle with a high torque. Optional safety springs retain the components, in case of air supply fail or to increase grip force. It is ideal for a large range of options such as pneumatic operation, clamping, seals etc…
These grippers were specially manufactured for heavy duty, extreme high temperature applications.
Some key features:
• Grip force (N): 313-3941
• Variant gripper size and features:
• 62 M:
Opening Angle: 16.8°
Grip Force N: 313-384 (70-86)
• 82 M:
Opening Angle: 15.9°
Grip Force N: 922-1228 (207-276)
• 112 M:E67
Opening Angle: 19.1°
Grip Force N: 1600-2150 (360-483)
• 142 M:
Opening Angle: 17.6°
Grip Force N: 3941-5775 (886-1298)
• 162 M:
Opening Angle: 17.2°
Grip Force N: 3790-5490 (853-1234)
Close Force: 3180 N
Open Force: 3400 N
Air pressure set at: 0.6 MPa.
Measurement Distance L: 20 mm
Jaw Stroke: 24mm(dia.), 12mm(per finger)
Repeatability: ±0.01 mm
Mass : 2.25 kg
Air Consumption per reciprocating : 201 cm3
Air pressure : 0.2 ~ 0.8 MPa
Operating Temperature : 5 ~ 60 ℃
Pick & Place
3D applications customized system is a tool intended for:
• Integrators
• Machine builders
• Industrial end-users
This is an ideal tool for any robotic professional that is willing to develop its own 3D vision applications.
Some key features:
Pixels resolution: From 2.3 M to 5 M depending the option
Camera Resolution: From 1920 x 1200 to 2590 x 2048 depending the option
Working extent : From 450 to 2000 mm approx.
Scanning Time: From a minimum of 0.3 Sec to a minimum of 0.8 Sec.
Painting
The 3D Image system is a system consisting of management software and one or more 3D scanners mounted on a line capable of recognizing the size of three-dimensional objects and associating the corresponding painting program.
In a first phase of work the programs for each type of piece are created, after which it is simply necessary to load the supply line with the pieces to be painted.
The 3D image system pro will take care of recognizing the pieces through its 3D scanners and applying the relative painting program.
It recognizes the inclination and position of the pieces and automatically adjusts the painting path.
It can distinguish between objects of different thickness.
It recognizes the real position and adjusts the painting path.
Pick & Place
The software has the ability to transform any camera into a 3D measurement device.
It has the capacity to detect objects and extracts their position and orientation from a single image.
6 numbers are provided for any selected object
• Position X,Y,Z
• Orientation angles A,B,C
Numerous advantages:
• Recognize objects for robots without coding
• Any kind of cameras can be used (webcam, smartphone etc…)
• Uses low cost sensor
• No additional equipment needed
Other advantages:
• Speed:
• No point clouds
• Using NVIDIA GPU can run 30 frame/sec
• Fast object tracking
Flexibility:
• Define objects for robots without coding
• Any camera : WebCam, Industrial even Smartphone
• Working range could be easily adapted
• System setup
Precision:
• RGB camera allows to use different optics
• Getting close to the object allows submillimeter position accuracy
Price:
• Uses low cost sensors
• Can run on a computer with GPU or NVIDIA JATSON
• No additional equipment
• Competitive software pricing
Welding
3D vision guided robot tool benefits:
• Analyzes and identifies randomed items,
• Pinpoints their positions and orientations
• Gives a command to the robot to fulfill a precise task following an automatically generated path.
• With a minimum scanning time of 0.3s, the system reduces the need for fixtures and precise positioning in the manufacturing process
• Can quickly identify the products features and changes.
3D vision guided robot (VGR) can be used for applications including:
Sealing, welding and polishing among others.
The solution is compatible with most of the industrial robots such as:
Kuka, Yaskawa, ABB, Omron etc… including Collaborative robots.
Pick & Place
The 3D vision system offers a multitude of benefits that make it an ideal product for handling a large variety of items stored in warehouses. One of its unique features is the ability to control grippers, ensuring careful picking up of objects. In addition, the system can quickly scan the dimensions of a box, which enables it to identify the best location for an item. The product also has a simple user interface, which makes it easy for users to build several packaging applications without any code writing. What’s more, the solution is compatible with most industrial robots and cobots, including collaborative robots, which makes it an ideal choice for many companies looking to streamline their warehouse processes.
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
There are many passages of Lorem Ipsum
Why Shop On Our Marketplace?
Our experts will support you
whenever you need us.
We guarantee to find you the
best solution at the best price.
International online and offline
trade and services.
for filling out your information!
We will look over your message and get back to you ASAP
Start to maximize the value of your assets with us.
